 |
Dog
Pound
[FORK-LIFTABLE]
[UNIVERSAL LIGHT BULB CADDY] [INSU-LIFT]
[LOCK-N-LIFT]
Use to perform elevated maintenance jobs where scaffold and ladders are not practical or safe. Four inch kick plate surrounds the non-skid 11 gage diamond plate floor. Double safety chains to secure platform to the forklift. 42” high removable side rails and mesh back to eliminate access to gears, pulleys, and chains. Optional back cage riser to meet California codes. Optional hinged door, tool tray, and universal light bulb caddy also available. OSHA requirements: The outside of the platform cannot extend more than 9” beyond the outside edge of the forklift wheels. |
 |
| SHOWN with (optional): MP-E: Back Riser; MP-HD: Universal Light Bulb caddy; MP-HD: Hinged Door; MP-T: Tool Tray | |
All
models have the following: |
 |
|
| •
42" high Handrails |
||
• 42"
high Mesh Guard in Back |
||
• 4"
Kickplate |
||
• 3"
x 6" Forklift Openings |
||
• 1 1/4"
Square Tubing Handrails |
||
• 11 gauge
Steel Treadplate Flooring |
||
• 3"
Caster Wheels |
||
| Load
capacity: 1000 lbs.(2, 3, 4, 5) |
||
 |
Part
# MP-2 |
|
60"
W x 40" D* |
||
* Has
2 doors at the End |
||
| Part
# MP-3 |
 |
|
| 36"
W x 36" D* |
||
| * Available with
Door or Chain in fron |
||
Part
# MP-4 |
Part
# MP-5 |
|
36" W x
48" D* |
40"
W x 48" D * |
|
* Available with
Door or Chain in front |
*
Available with Door or Chain in Front |
|
| Load
capacity: 2000 lbs. (6, 7, 8, 9) |
 |
|
| MP-6
- 4’ W x 8’ D MP-7 - 4’ W x 10’ D MP-8 - 4’ W x 12’ D MP-9 - 4’ W x 16’ D |
| WEIGHTS |
|
| MP-2
- 309 lbs. |
MP-6
- 580 lbs. |
| MP-3
- 205 lbs. |
MP-7
- 725 lbs. |
| MP-4
- 250 lbs. |
MP-8
- 940 lbs. |
| MP-5
- 270 lbs. |
MP-9
- 1,380 lbs. |
Optional
Back Mesh Panel , hinged door, tool box, and light caddy available. |
 |
|
| Part # MP-LBC | |
| 14” x 13” x 34.5” H | |
| Weight: 14.5 lbs. | |
|
For use with any Aerial Maintenance Work Platform |
|
| The
universal shatter resistant bulb caddy simply hooks over the handrail
of any forklift work platform. This is a perfect alternative to
metal units that promote florescent bulb breakage. You can store
individual or full box of bulbs. The caddy is compatible with any
work platform. Manufactured of UV protected polyethylene that will
not rust, scratch, or dent. Color: Safety Yellow |
 |
Dixie
Non-Conductive Work Platform |
|
 |
Changing lightbulbs or other high-reaching electrical tasks is easy when you use this poly work platform. Poly material makes this unit completely non conductive. Dual chain front gate and non-skid floor keep worker safe during use. Also includes a molded in tool tray. |
| Part # MPP-1 | |
| 36" x 40" x 48.25" H | |
| 104 lbs | |
| Work
Platform/Tool Security Locker |
|
| The
lock & Lift attaches to forklifts for aerial maintenance projects.
It can also eliminate the theft of expensive tools and equipment
during off hours and lunch breaks. The top folds down and interlocks
with the front door. The lock & Lift saves the time of putting
away tools and getting them out again at the start of each day.
With four swivel casters the Lock & Lift can easily be rolled
from job to job or lifted with a fork lift. Meets or exceeds OSHA
standards. Safety yellow fi nish with an anti slip diamond plate
bottom. |
|
 |
|
Part
# MP-JB |
|
36” L x
40” W x 42” H |
|
1000 lb. Load
Capacity |
|
Weight: 275 lbs. |
|
|
Shown with optional Light bulb caddy. |
|
© 2004 Dixie Poly Drum Corp.
Ph: 1-800-845-0536 • Fax: (843) 589-4050 • P.O. Box 597
28 Dixie Poly Drive Yemasse, SC 29945
Site Design and Maintained by: El B Designs, Inc.